3 File Copy Function
29-30 WindO/I-NV4 User’s Manual
3.1 What Can Be Done with the File Copy Function
The file copy function is used to copy files between an SD memory card and a USB flash drive inserted in the MICRO/I
or to internally copy files on an SD memory card or on a USB flash drive.
Copying from SD memory card to USB flash drive, or from USB flash drive to SD memory card
Copy files between an SD memory card and a USB flash drive inserted in the MICRO/I.
Internally copy files on an SD memory card
Internally copy files on an SD memory card inserted in the MICRO/I.
Internally copy files on a USB flash drive
Internally copy files on a USB flash drive inserted in the MICRO/I.
3File Copy Function
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
HG3G
HG2G-5F
HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
Copy
USB flash drive
File
SD memory card
MICRO/I
HG3G
HG2G-5F
HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
Copy
FileFile
SD memory card
MICRO/I
HG3G
HG2G-5F
HG4G
HG5G-V HG4G-V HG3G-V HG2G-V
Copy
FileFile
USB flash drive
MICRO/I
When the MICRO/I is under the Run Mode, HMI Special Internal Relay LSM23 is 1 while the File Copy
function is executed.
To Next Page
Loading...