IDEC MICRO/I HG1G-4VT22TF Series User Manual

2 Character Input
10-50 WindO/I-NV4 User’s Manual
5 Click the Format tab, select the Japanese as the Font, and then select the 16x16 as the Size.
6 Click OK.
The Properties of Character Input dialog box closes.
7 On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
8 Click the Font/Kanji Dictionary Data tab, and then select the Use Kanji dictionary data check box.
9 Click OK.

IDEC MICRO/I HG1G-4VT22TF Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1G-4VT22TF Series
Category	Control Panel
Language	English