WindO/I-NV4 User’s Manual 11-33
2 Line Chart
11
Charts
Specifying Date and Time with Values of device addresses
Using this option requires the sequential address number of 6 words starting from the specified device address. The
data is handled as BCD values in the order of year, month, day, hour, minute, and second.
Example: Top Device Address is LDR100, and the date and time is October 1 2018 12:01:30.
â– Scale
â– Label
Read source Date and time data
(the address number of Top Device Address) LDR 100 2018 (Year)
+1 LDR 101 10 (Month)
+2 LDR 102 1 (Day)
+3 LDR 103 12 (Hour)
+4 LDR 104 1 (Minute)
+5 LDR 105 30 (Second)
Show Ticks: Select this check box to display a scale on a X-axis.
Major Divisions: Enter the number of major scale divisions (1 to 20).
Minor Divisions: Enter the number of minor scale divisions (1 to 20).
Color: Selects the color of scales (color: 256 colors, monochrome: 16 shades).
Click Color to display the Color Palette. Select a color from the Color
Palette.
If the area for displaying the scale is small, the scale will not be displayed properly.
Show Label: Select this check box to display a label on X-axis scales.
Use Text Manager: Select this check box if using the text registered in Text Manager for labels. Can
only be set when the Show Label check box is selected.
If a carriage return (CR) is included in the character displayed on the label, the characters after the CR are
not displayed. However, if Windows Font is set for the specified Text ID, all the characters are displayed.
To Next Page
Loading...
Need help?
General
