iDect FC6A series User Manual

3: I NSTALLATION AND W IRING
3-8 FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722
Opening and Closing the Front Cover of the HMI Module
The following procedure describes how to open and close the front cover of the HMI module.
Opening the Front Cover
1. Push the access symbol until it clicks to unlock the front cover.
2. The front cover will open.
Closing the Front Cover
1. Close the front cover.
2. Push the access symbol until it clicks to lock the front cover.
Always unlock the front cover before opening it with the following procedure. Otherwise there is a risk of damage to the
HMI module.
Caution
Front Cover
Front Cover
Access Symbol
Always lock the front cover with the following procedure.
Caution
Front Cover
Front Cover
Access Symbol

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English