iDect FC6A series - Page 165

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 3-35
3: I NSTALLATION AND W IRING
Recommended Ferrule List
The following ferrules can be used with the FC6A Series MicroSmart.
The recommended ferrules are manufactured by Phoenix Contact.
■ CPU Module
*1 For the wires that can be used, see "Wiring the CAN J1939 Bus" on page 3-38.
CPU Module Terminals
Power Supply
Terminals
Input Terminals
Output Terminals
CAN Port
(CAN J1939 All-in-One
Type only)
Wire Type
UL1007
UL2464
UL1015
UL1007
UL2464
UL1015
UL1007
UL2464
Equivalent
UL1015
Equivalent
*1
Stripping length (mm) 7 7 10
Wire thickness (mm
2
) 0.2 to 2.5 0.2 to 2.5 0.2 to 2.5
Wire
gauge
AWG 24
1-wire
usage
AI 0,25- 6 (3203040) Yes ― Yes ―――
AI 0,25- 8 (3203037) Yes ― Yes ―――
AI 0,25-10 (3241128) ――――Yes ―
AWG22
1-wire
usage
AI 0,34- 6 (3203053) Yes ― Yes ―――
AI 0,34- 8 (3203066) Yes ― Yes ―――
AI 0,34-10 (3241129) ――――Yes ―
AWG20
1-wire
usage
AI 0,5- 6 (3200687) Yes ― Yes ―――
AI 0,5- 8 (3200014) Yes ― Yes ―――
AI 0,5- 8 GB (1208966) ― Yes ― Yes ――
AI 0,5-10 (3201275) ――――Yes ―
AI 0,5-10 GB (3203150) ―――――Yes
2-wire
usage
AI-TWIN 2 x 0,5-8
(3200933)
Yes ― Yes ―――
AI-TWIN 2 x 0,5-10
(3203309)
――――Yes ―
AWG18
1-wire
usage
AI 0,75- 6 (3200690) Yes ― Yes ―――
AI 0,75- 8 (3200519) Yes ― Yes ―――
AI 0,75-10 (3201288) ――――Yes ―
AI 1-8 (3200030) ― Yes ― Yes ――
AI 1-10 (3200182) ―――――Yes
2-wire
usage
AI-TWIN 2 x 0,75-8
(3200807)
Yes ― Yes ―――
AI-
TWIN 2 x 0,75-10
(3200975)
――――Yes ―
AWG16
1-wire
usage
AI 1,5- 6 (3200755) Yes Yes Yes Yes ――
AI 1,5- 8 (3200043) Yes Yes Yes Yes ――
AI 1,5-10 (3200195) ――――Yes Yes
2-wire
usage
AI-TWIN 2 x 1,5-8
(3200823)
YesYesYesYes ――
Screwdriver
SZS 0.4×2.5 (1205037) ―――
SZS 0.6×3.5 (1205053) Yes Yes Yes
Tightening torque (N) 0.5 to 0.6 0.5 to 0.6
0.5 to 0.6 (terminals)
* 0.2 to 0.3
(locking components)