FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-25
2: P
RODUCT
S
PECIFICATIONS
Ambient Temperature, Input Voltage, I/O Simultaneous ON Ratio
When the FC6A Series MicroSmart is used in an ambient temperature of 45°C or higher, reduce the input voltage and I/O
simultaneous ON ratio (a%) according to the following diagrams. However, the following diagrams show the temperature
conditions when the FC6A Series MicroSmart is normally installed.
Note: Normally installed means the state in the diagram in "Normal Installation State" on page 3-1.
The usage conditions will also change according to the installation state. For details, see "Installation Location" on page 3-1.
■ Relay output type
There are no usage restrictions for input and output I/O.
■ Transistor sink output type
• There are no usage restrictions for input and output I/O when no cartridges are installed.
• When a cartridge is installed, reduce the input voltage and I/O simultaneous ON ratio (a%) as shown in the following diagrams.
24V DC Power Type
12V DC Power Type
*1 The values in parentheses are for the CAN J1939 All-in-One Type.
Output I/O
I/O Simultaneous
ON Ratio (%)
100%80%70%
24.0 V
Input Voltage (V DC)
28.8 V
Ambient
Temperature
45°C
Ambient
Temperature
55°C
Input I/O
I/O Simultaneous
ON Ratio (%)
100%80%70%
24.0 V
Input Voltage (V DC)
28.8 V
Ambient
Temperature
45°C
Ambient
Temperature
55°C
0%
0 V
0%
0 V
Output I/O
I/O Simultaneous
ON Ratio (%)
100%80%70%
12.0 V
Input Voltage (V DC)
18.0 V
(16.0 V )
Ambient
Temperature
45°C
Ambient
Temperature
55°C
Input I/O
I/O Simultaneous
ON Ratio (%)
100%80%70%
12.0 V
Input Voltage (V DC)
18.0 V
Ambient
Temperature
45°C
Ambient
Temperature
55°C
0%
0 V
0%
0 V
To Next Page
Loading...