EasyManua.ls Logo

iDect FC6A series - Page 67

iDect FC6A series
474 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
S
M
ANUAL
FC9Y-B1722 2-39
2: P
RODUCT
S
PECIFICATIONS
Input Internal Circuit
FC6A-N08B1, FC6A-N16B1
FC6A-N16B3, FC6A-N32B3
Ambient Temperature, Input Voltage, I/O Simultaneous ON Ratio
When the FC6A Series MicroSmart is used in an ambient temperature of 30°C or higher, reduce the input voltage and I/O
simultaneous ON ratio (a%) according to the following diagrams. However, the following diagrams show the temperature
conditions when the FC6A Series MicroSmart is normally installed.
Note: Normally installed means the state in the diagram in "Normal Installation State" on page 3-1.
The usage conditions will also change according to the installation state. For details, see "Installation Location" on page 3-1.
I/O Simultaneous ON Ratio (a%)
*1 For the usage ratio of connector CN1 and CN2 inputs, set each to a% or lower.
FC6A-N08B1 FC6A-N16B1 FC6A-N16B3, FC6A-N32B3
FC6A-N08B1 I0 to I7 There are no usage restrictions for input and output I/O.
FC6A-N16B1
I0 to I7
I10 to I17
Set the usage ratio of the inputs (ON status) to a% or lower according to the conditions in the
above graph.
FC6A-N16B3
I0 to I7
I10 to I17
Set the usage ratio of the inputs (ON status) to a% or lower according to the conditions in the
above graph.
FC6A-N32B3
CN1
I0 to I7
I10 to I17
Set the usage ratio of the inputs (ON status) to a% or lower according to the conditions in the
above graph.
*1
CN2
I20 to I27
I30 to I37
Set the usage ratio of the inputs (ON status) to a% or lower according to the conditions in the
above graph.
*1
3.3 KΩ
COM
Input
Internal Circuit
4.3 KΩ
COM
Input
Internal Circuit
100%0%
24.0 V
0 V
26.4 V
28.8 V
I/O Simultaneous
ON Ratio (%)
Input Voltage (V DC)
Ambient
Temperature
55°C
100%70%0%
24.0 V
0 V
26.4 V
28.8 V
I/O Simultaneous
ON Ratio (%)
Input Voltage (V DC)
Ambient
Temperature
45°C
Ambient
Temperature
55°C
100%90%70%50%0%
24.0 V
0 V
26.4 V
28.8 V
I/O Simultaneous
ON Ratio (%)
Input Voltage (V DC)
Ambient
Temperature
30°C
Ambient
Temperature
55°C

Table of Contents