prox.pad Installation/Programming Manual
Action Desired Press Details
Program User - Card Only
By Presenting Card
50 # user type # user location # **
<present card>
User Types:
0-Toggle/latch lock
1-Normal access
2-log Dump
3-Lockout
Program User – Card Only
Without Presenting Card
51 # user type # user location #
card PIN * card PIN *
User Types:
0-Toggle/latch lock
1-Normal access
2-log Dump
3-Lockout
For 26-bit Cards only.
The card PIN appears on the card
(facility code must be entered first;
see 32 # 2 # command)
Program User – Code OR Card
By Presenting Card
52 # user type # user location #
code * repeat code * <present
card>
User Types:
0-Toggle/latch lock
1-Normal access
2-log Dump
3-Lockout
Program Consecutive Users – Card
Only
By Presenting Cards
53 # user type # start user # **
<present card> <present card> ...
User Types:
0-Toggle/latch lock
1-Normal access
2-log Dump
3-Lockout
Simply present one card after
another.
Program Consecutive Users – Card
Only
Without Presenting Cards
56 # total count # user location #
card PIN * card pin *
“Total count” = total number of
cards to be entered; card PIN
appears on card; a facility code
must be entered first (see command
32, option # 2)
Delete Block of Consecutive Users 58 # start user # start user #
number of users * number of users
*
Dump Transaction Event Log 70 # 0 # 0 # ** See section 2.8.2.B
Page 58 of 86 Document # 6055676, Rev 2.2, D4b
To Next Page
Loading...
Need help?
General
