IFM AC1421 - Page 125

125
ifm Programming Manual AS-i Gateway AC14 (4.2.x) 12/2017
Appendix Library ACnnnn_SYS_CMD.library
>
Output parameters
15897
Parameter
Data type
Description
Possible values
uCount
WORD
Number of valid bytes in pDataOut
(uCount <= uSizeOut)
integer value in hexadecimal
representation
xReady
BOOL
Signal indicates if the execution of the
FB is terminated.
FALSE
FB is inactive or being
executed.
TRUE
FB execution is terminated.
xError
BOOL
Signal indicates if errors occurred
while the FB was executed.
FALSE
FB is disabled or presently
executed or FB was executed
without error.
TRUE
An error occurred when the FB
was executed.
uErrorCode
WORD
Error code of the executed command
Command error code of the corresponding
command channel
OR: → List below (Diagnostic codes)
Diagnostic codes:
 0xnF01
Unknown error
1
 0x0F02
Unknown/invalid target
 0x0F03
Unknown command ID
 0x0F04
Invalid parameters
 0x0F05
Timeout during processing