124
ifm Programming Manual AS-i Gateway AC14 (4.2.x) 12/2017
Appendix Library ACnnnn_SYS_CMD.library
Description / corresponding command
Command 0x0044 – CTT2 vendor specific selective read
Command 0x0045 – CTT2 vendor specific selective write
Command 0x0046 – CTT2 device group selective read
Command 0x0047 – CTT2 device group selective write
Command 0x0049 – CTT2 vendor specific exchange
Command 0x004A – CTT2 device group exchange
Command 0x004B – CTT2 device group selective read from buffer
Command 0x004C – CTT2 device group selective write from buffer
Command 0x0050 – Set AS-i master settings
Command 0x0051 – Reset error counter
Only execute AS-i master commands with input parameter uTarget = 1 or 2!
Detailed information about the acyclic data sets and the command interface is given in the
supplement to the device manual of the AS-i Gateway AC14 (→ Overview: User documentation
for AS-i Gateway AC14 (→ p. 5)).
To Next Page
Loading...
