Draco KVM Extender
36 2011-03-09
6 Operation
Pos: 33 /806-IHSE/Be trieb/Laden von DDC-Infor mationen/477-xx @ 5\mod_127 8937455136_6.doc @ 43130 @ 2
6.1 Download of DDC Information
By default, data from the internal DDC list is reported to the source
(computer, CPU). If these settings do not lead to a satisfying result, the
DDC information of the console monitor can be downloaded and stored
internally. The devices have to be configured accordingly (see
Chapter 5.2, Page 34).
On all KVM Extenders with USB-HID support, the user can load the DDC
information of the console monitor via keyboard command under operating
conditions.
1. Enter Command Mode with the 'Hot Key' (see Chapter 5.3, Page 35).
2.
Press the key <a> to download the DDC information of the console
monitor.
The screen goes black for a short time.
At the same time Command Mode is closed and the keyboard LEDs
return to previous status.
The video mode has been readjusted. Screen quality should be
optimal. The CPU should now show the console monitor as the
current screen, together with the available video resolutions.
The DDC information of the console monitor was loaded once.
Reloading is possible by repeating the operation.
Pos: 34 /806-IHSE/ Technische Daten/UEB_Tec hnische Daten @ 5\mod_127857 8165261_6.doc @ 42096 @ 1
To Next Page
Loading...
Need help?
General
