ILX Lightwave LDC-3700 Series User Manual

PARAMETERS
None. The response will be in the form:
POINTS
OF
INTEREST
EXAMPLES
H Front Panel
Returns the actual (6character) string from the output buffer to the LASER display. If the
-lay is disabled, it
returns " . ".
In local mode, the user would read the LASER display visually.
"LAS:DIST
-response: "- 99.9", means the LASER display shows "- 99.9"
"Laser:DISpT -response:
"
0.6", means the LASER display shows " 0.6".
The LASer:DISplay:
command path is used to get to the LDC-3700 Series Laser Diode Controlleis laser
display commands.
The following commands may be reached directly from the LASer:DISplay: command path.
The LASer:DISplay:LDI command sets the laser display to show the constant current measurement.
SYNTAX
DIAGRAM
n
PARAMETERS None.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English