ILX Lightwave LDC-3700 Series User Manual

SYNTAX DIAGRAM
PARAMETERS
Poms OF
INTEREST
EXAMPLES
Front Panel
An <nrf value> which represents the (laser) output current, in mA.
Set point is the same for both low and high bandwidth output modes.
In local mode, the LASER I switch in the LASER DISPLAY area of the fiont panel would be
pressed. Then, the desired value would be entered via the ADJUST knob, and the (LASER
DISPLAY) SET switch pressed.
"Las:LDI 400" -action: sets the laser output current to 400.00mA
"LAS:ldi 1000" action: sets the laser output current to 1000.00 mk
The LASer:LDI? query returns the value of the measured laser current.
SYNTAX DIAGRAM
PARAMETERS
None. The response will be in the form:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English