Image Access bookeye 3 Assembly Manual

A.1.2.3 Scanner Table
Place the device on a flat and solid base, preferable a solid table.
Please note: The load bearing capacity of the table must correspond to the device
weight. The table should be build to hold at least three times the weight of
the unit.
Also it should not shake or move to avoid image distortions. If the table is too weak it can
be attached to a solid wall to stabilize it.
A.1.2.4 Power outlet
Ensure that the power outlet is always accessible when the scanner
is placed at its working position.
This will help to separate the device from the power outlet in case of an emergency.
Setup and Assembly Manual Page 17

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English