Image Access bookeye 3 Assembly Manual

B.2.4.2 White Balance with Glass Plate opened
Start in the Adjustments & Support screen (Picture 52).
Perform the measurement as follows:
1. Find the section White Balance Adjustments and click the button White Balance .
Picture 63: Glass plate positions for white balance
Press the Next Step button below the picture corresponding to the selected glass plate
position.
2. Close the book cradles completely and move them to the lowest position.
Note: The position of the book cradles is verified. If the book cradles are not in the
lowest (home) position, a Retry button and a message are displayed on the
screen instead of the Next Step button.
After moving the book cradles to the lowest position press the Retry button.
Setup and Assembly Manual Page 55

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English