Image Access bookeye 3 Assembly Manual

A.2.2 Assembling Lamps and Camera to the Body Element
Take the body element out of the transport box.
Note: Because of the device weight, lifting the body element out of the transport box
must be done by two persons.
Picture 15: Two persons(!) lift the device out of the transport box
Place it on a suitable stable surface. The bearing capacity of the table must exceed the
total weight of the scanner.
Before continuing with the next steps, remove the foam rubber elements and the
protection foil.
Setup and Assembly Manual Page 21

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English