Image Access bookeye 3 Assembly Manual

Error # Error message shown in
the display
Error message sent to
application
Problem description
65 E65 CAM DATA BUS
CAMERA 2
Camera 2 data bus error.
Test data transfer to camera failed.
Check cables / connectors to camera
2 and S2N-PCI board.
66 E66 CAM DATA BUS
CAMERA 3
Camera 3 data bus error. Test data transfer to camera failed.
Check cables / connectors to camera
3 and S2N-PCI board.
67 E67 ADC ERROR
CAMERA 1
Camera 1 adc error.
Test data transfer through analog
digital converter failed. Check cables /
connectors to camera 1.
68 E68 ADC ERROR
CAMERA 2
Camera 2 adc error. Test data transfer through analog
digital converter failed. Check cables /
connectors to camera 2.
69 E69 ADC ERROR
CAMERA 3
Camera 3 adc error.
Test data transfer through analog
digital converter failed. Check cables /
connectors to camera 3.
75 General keyboard error General keyboard error. Check
keyboard and cables.
99 Internal error. The firmware has detected an internal
error of unknown cause.
Error # Warning shown in the
display
Warning sent to
application
Problem description
144 Light level is low The light level is found to be low
during the white balance function.
146 W146 LEFT LAMP
BLOCKED
Left lamp blocked. The left lamps travel range is blocked.
147 W146 RIGHT LAMP
BLOCKED
Right lamp blocked. The right lamps travel range is
blocked.
160 No white balance data No white balance data was found.
Perform white balance.
180 Deskew failed The deskew function failed.
Reposition document.
Setup and Assembly Manual Page 75

Image Access bookeye 3 Specifications

General

Brand	Image Access
Model	bookeye 3
Category	Scanner
Language	English