iNetVu 7000 Series User Manual

C-COM Satellite Systems Inc. Page 69 of 164
7.6.4.10. C3
Fig. 49: Controller C3 Configuration
1- Current LCD and Web Interface Password
The user may change this password by using the “↓” and “↑” buttons on the front panel
of the 7000 Series controller and the “→” and “←” buttons to navigate through the
character fields. This password must be remembered in order for the user to re-enter
the LCD screen configuration interface, or the web interface.
2- LO – (LNB)
Configurable to allow satellite accusation when frequency changes, values range from
10.75, 9.75, 10.00, 10.60 and 11.30.
The default value should be set to 10.75, the user is not required to change this value
unless necessary, otherwise select the carrier from the table or enter one if not listed.
3- 22 KHz Tone (Enable/Disable)
This feature allows users to enable/disable the 22 KHz tone for supporting LNB’s.
E – Enabled
D – Disabled
4- DISABLE STOW
The system can be configured to disable the STOW by changing the ID.
8755 – Disables the STOW
8955 – Enables the STOW
PWD :: password
LO :0—10.75 D 9999
1
2
3
4

iNetVu 7000 Series Specifications

General

Brand	iNetVu
Model	7000 Series
Category	Controller
Language	English