iNetVu 7000 Series User Manual

C-COM Satellite Systems Inc. Page 145 of 164
10.2. How to Set Network Configurations on your PC
1. Open Network Connections, right-click your
network card, and select Properties.
2. Select Internet Protocol (TCP/IP) and click
Properties.
3. Direct Network Connection:
Set your PC to the same subnet as the iNetVu
®
7000 Series Controller, and the Default Gateway to the
iNetVu
®
7000 Series Controller.
The screenshot depicts this configuration.
Network Connection via Router/Switch:
Dependent on Network Configuration (See
previous section)

iNetVu 7000 Series Specifications

General

Brand	iNetVu
Model	7000 Series
Category	Controller
Language	English