Inficon XTC/3 User Manual

3 - 4
XTC/3 Operating Manual
3.3 Displays
Seven XTC/3 display screens are used for monitoring
and programming processes:
 Operate
 Film Parameter
 Process List (XTC/3M only)
 General Parameter
 I/O Map
 Diagnostics
 Sensor
To maximize the life of the display, it can be set to dim after a period of 1 to 99
minutes without a key press (see section 4.4.2, Hardware Parameters, on page
4-21, parameter LCD DIMMER TIME).
Pressing a key before the dimmer time elapses resets the dimmer interval
to start over.
The default setting of 0 disables the dimmer function.
When the display is dimmed, its brightness will be:
 bright if a film is running
 dark if a film is not running (as in Ready or Idle)
All keys remain active. To restore the display to full brightness without inadvertently
changing parameters, press either HELP: or
◄ or ►.

Inficon XTC/3 Specifications

General

Brand	Inficon
Model	XTC/3
Category	Controller
Language	English