Setting up
Connecting with your devices (continued)
Computer
Access
point
USB
storage
device
(continued on next page)
• If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
NOTE
► Before connecting the projector to a network system be sure
to obtain the network administrator’s approval.
►Do not connect the LAN port to any network that might have excessive volt-
age.
►Before removing a USB storage device from the projector port, be sure to use
the REMOVE USB feature on the thumbnail screen to secure your data. (73)
CAUTION
To Next Page
Loading...
