InFocus IN5122 - Presentation Mode Settings; Presenter Mode Control; Multi PC Mode Display Options

59
NETWORK menu
Item Description
PROJECTOR
NAME
(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will display.
(2) The current PROJECTOR NAME will display on the rst 3 lines.
A particular projector name is pre-assigned by default.
Use the ▲/▼/◄/► buttons and the SELECT button to select
and enter characters.
To erase 1 character at one time, press the ◄ and SOURCE
buttons simultaneously. Also if you move the cursor on the
screen to DELETE or ALL CLEAR and push the SELECT
button, a single character or all characters will be erased.The
PROJECTOR NAME can have up to 64 characters.
(3) To change an already inserted character, press the ▲/▼ buttons
to move the cursor to one of the rst 3 lines, and use the ◄/►
buttons to move the cursor on the character to be changed. After
pressing the SELECT button, the character is selected. Then,
follow the same procedure as described in step (2) above.
(4) To nish entering the text, move the cursor on the screen to
OK and press the ► and the SELECT button. To revert to the
previous PROJECTOR NAME without saving changes, move
the cursor to CANCEL and press the ◄ and the SELECT button.
(continued on next page)