InFocus IN5132c User Manual

86
SECURITY menu
Item Description
PRESENTATION
(continued)
MULTI PC
MODE
(continued)
• To change from Single PC mode to Multi PC mode,
press ► button to choose OK in the dialog and press
the
ENTER
or
INPUT
button.
The display mode will change.
• For details on how to switch the display mode to Multi
PC mode on your computer, refer to the LiveViewer
manual .
• The Presenter mode setting of the selected
computer becomes valid when the display mode is
changed to Single PC mode.
The Presenter mode setting
is unavailable when the
display mode changes to Multi
PC mode, regardless of the
computer settings.
For details, refer to the LiveViewer manual.
DISPLAY
USER NAME
Select this to display the user name. This function
helps you identify which computer is sending the
current image.
• You can choose a user name for each computer
in LiveViewer. For details, refer to the LiveViewer
manual.
SERVICE
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button ►.
Then use the button ► to execute.
When you choose restart, network communciation will be cut off.
If DHCP is ON, the IP address may change.
After selecting NETWORK RESTART EXECUTE, the NETWORK
menu may not be available for approximately 30 seconds.

InFocus IN5132c Specifications

General

Brand	InFocus
Model	IN5132c
Category	Projector
Language	English