52
INPUT menu
Item Description
COMPUTER IN
The computer input signal type for
COMPUTER IN1
and
IN2
ports
can be chosen.
(1)
Use the ▲/▼ buttons to select the
COMPUTER IN
port to be set.
(2) Use the ◄/► buttons to select
the computer input signal type.
AUTO
ó
SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port.
• In the AUTO mode, the picture may be distorted with certain input
signals. In this case, remove the signal connector so that no signal
is received and select the SYNC ON G OFF, and then reconnect the
signal.
FRAME LOCK
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select
the input ports.
(2) Use the ◄/► buttons to turn the
frame lock function on/off.
ON
ó
OFF
• This item can only be performed on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
(continued on next page)
To Next Page
Loading...
Need help?
General
