Ingersoll-Rand INSIGHTqc - Creating Filter

Creating Filter
To expand Filter contents, select . User can select one or more filters from the filter type fields
and then select Apply . The result will be displayed on the Cycle Results screen. To view unfiltered
result, user can select Clear to remove the filters and then select Apply .
Filter Type Action
Job Name
From the Job Name field, select a job from
the drop down list.
Pset
From the Pset Name field, select a Pset
from the drop down list.
Start date and End
date
In the Start Date field, select
to choose
a start date.
In the End Date field, select
to choose
an end date.
Start time and End
time
In the Start Time field, enter a start time.
In the End Time field, enter a end time.
Operator
From the Select Operator field, select an
operator.
Barcode
If Barcode scanner is enabled, the
scanned barcode details will be displayed.
Shutdown Reason
From the Shutdown Reason field, select a
reason from the drop down list.
Result Under Result, select any one.
Go to top
Close