Close
Go
Back
Job
Results
This
screen
provides
the
overall
result
for
each
execution
of
a
specific
job
with
the
ability
to
view
all
the individual cycle results that constituted the execution of the job. User can create a filter to
display
results
for
a
specific
job.
Parameters
displayed
on
the
Job
Results
screen
are
described
as
follows:
Parameter Description
Result Result of the performed job.
Job Cycle Number
Incremental number of jobs run by
the controller. This is used to
uniquely identify the fastening
results associated with the
execution of a particular job.
Job
ID
Matched with a job and is used for
external job selection.
Job Name Name given to identify the job.
Date
&
Time
Date and time of completing the
fastening operation.
Job
Failure
Mode
Indicates the reason for a job
failure.
To get additional information on a specific result record, select . Parameters displayed on the
Pset
results
for
the
corresponding
job
are
described
as
follows:
Parameter Description
Cycle Pass/Fail
Indicates the overall pass/fail
status of the fastening that
generated the fastening results.
Measured
Torque
Maximum value of torque
achieved during fastening.
Date
&
Time
Date and time of completing the
fastening operation.
Torque Result
Torque result is 'High Torque'
failure, if the value of torque
exceeds the maximum torque limit.
To Next Page
Loading...
