EasyManua.ls Logo

Ingersoll-Rand INSIGHTqc - Power Focus Open Protocol

Ingersoll-Rand INSIGHTqc
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Close
Go
Back
Power
Focus
Open
Protocol
Power
Focus
Open
Protocol
(PFOP)
is
a
communication
protocol
used
to
connect
the
controller
with various MES systems. To enable PFOP, select the Enable field to show indicator in ON
position.
To
enable
logs,
select
within
the
Enable
Logs
field
to
show
indicator
in
ON
position.
Fields
displayed
on
the
PFOP
screen
are
described
as
follows:
Field Description
PFOP
Version
Information
Read
only
field
containing
the
supported
PFOP
version.
Job ID
Number
that
uniquely
identifies
the
controller
on
the
PFOP
system.
Controller
Name
Name
that
uniquely
identifies
the
controller.
The
name
provided
must
be
in
plain
ASCII
text.
Port Number
Number
that
identifies
the
port.
Default
port
number
is
4545.
Retry
Interval
(Sec)
The
amount
of
time
to
wait
before
sending
the
message
again
in
case
of
no
reply.
Number of Retries
The
maximum
number
of
times
to
retry
sending
a
message
before
declaring
that
the
communication
is
lost
with
the
station
computer.
Enter
the
information
in
the
fields
and
then
select
Save.

Table of Contents

Related product manuals