Spindle Cycle
Incremental
number
of
fastenings
performed
by
the
connected
tool.
NOTE :
For
more
details,
from
the
right
hand
corner
of
the
cycle
results
area,
select
.
Communication
Protocol
Status
This area displays the connection status of various communication protocols associated with the
controller.
Communication
protocols
displayed
on
the
communication
status
area
are
described
as
follows:
Communication
Protocol
Description
Power
Focus
Open
Protocol
Indicates connection status of
Power Focus Open Protocol
(PFOP) station with the computer.
Barcode
Indicates connection status of the
barcode scanner.
EOR
Data
Out
Indicates connection status of
EOR Data Out with the Client.
Nissan EOR Out
Indicates connection status of
Nissan EOR Data Out with the
Client.
Ford Open Protocol
Indicates connection status of
Ford Open Protocol with the
Client.
Fieldbus
Indicates connection status of
Fieldbus protocol.
VWXML
Indicates connection status of
VWXML protocol.
Toolsnet
Indicates connection status of
Toolsnet protocol.
NOTE :
To
identify
the
connection
status
using
background
colors displayed for these communication protocols, refer to
Communication
Status
Indicators .
At the home screen, on the controller display unit, IP addresses are displayed near the
communication
protocol
status
area
for
reference.
This
feature
is
not
available
for
remote
access
of
To Next Page
Loading...
