This
is
used
to
uniquely
identify
fastening
results
for
a
particular
fastener.
Job
Name
Indicates
the
name
given
for
the
user
defined
job.
Pset
Name
Indicates
the
name
given
for
the
user
defined
Pset.
Job
Cycle
Number
Incremental
number
of
jobs
run
by
the
controller.
This
is
used
to
uniquely
identify
the
fastening
results
associated
with
the
execution
of
a
particular
job.
Barcode
If
enabled,
it
displays
barcode
scanned
from
a
scanner.
Operator
Name
Indicates
the
name
of
the
operator
who
performed
the
fastening.
Job
ID
Matched
with
a
job
and
is
used
for
external
job
selection.
If
available,
user
can
select
on
the
result
page,
to
view
Trace
related
information.
To
get
additional information on a specific result record, select
. A pop-up with complete Cycle
Results will be displayed. To refresh the cycle results, select .
Customizing
Columns
Do
the
following
to
customize
columns
while
displaying
cycle
results:
Select Customize Columns.1.
To
display
all
EOR
parameters,
check
Select
All.
Else,
proceed
to
step
3.2.
To
display
specific
EOR
parameters,
un-check
Select
All
and
then
check
the
required
parameters
from
list.
3.
To rearrange the EOR parameters, select the parameter and then select or to move
up/down.
4.
Select
Apply .5.
Exporting to CSV
To
download
cycle
results
in
CSV
format,
select
Export
to
CSV.
The
cycle
results
displayed
on
the screen will be downloaded. NOTE : User working on a local display must connect a USB pen
drive
to
the
controller
before
downloading.
To Next Page
Loading...
