Close
Go
Back
Toolsnet
Toolsnet
is
a
communication
protocol
used
to
connect
the
controller
with
Toolsnet
server
to
store
the tightening records and curve data in the toolsnet database. The controller connects to PIM
(Protocol
Interface
Module)
server
to
obtain
toolsnet
server
IP
address
and
port
number.
To
enable
Toolsnet,
select
the
Enable
field
to
show
indicator
in
ON
position.
To
enable
logs,
select
within the Enable Logs
field to show indicator in ON position.
Fields
displayed
on
the
toolsnet
screen
are
described
as
follows:
Field Description
System Type
Drop
down
list
contains
the
supported
System
Type.
Default system value is Ingersoll
Rand
PIM
IP
Address
IP Address of the PIM server.
Default
value
is
192.168.4.1
PIM
Port
Number
Port
number
of
the
PIM
server.
Default
port
number
is
6575
Retry
Interval
(Sec)
The
amount
of
time
to
wait
before
sending
the
message
again
in
case
of
no
reply
from
the
server.
Keep
Alive
Timer
(Sec)
The
timeout
value
for
the
keep
alive
message
and
server.
Max
Retries
(Sec)
The
maximum
number
of
times
to
retry
sending
a
message
before
declaring
that
the
communication
is
lost
with
the
station
computer.
System
Number
Number
that
identifies
the
system
number.
Default system value is 1
Station
Number
Number that identifies the station
number.
Default
station
number
value
is
1
To Next Page
Loading...
