Ingersoll-Rand INSIGHTqc - Page 24

portrait mode with
connectors facing
downward - default.
90
Screen will be set to
landscape mode
with connectors
facing left side.
180
Screen will be set to
portrait mode with
connectors facing
upward.
270
Screen will be set to
landscape mode
with connectors
facing right side.
Select Detect Controller to identify the controller to which the current user is connected. The
indicator on the Display panel of the controller will be lit for 30 seconds. This will help the user at
the plant to get visual confirmation that connection is established with the correct controller.
Go to top
Close