Ingersoll-Rand INSIGHTqc - Page 78

Parameters displayed on the Preventive Maintenance screen are described as follows:
Parameter Description
Alarms Indicates the type of alarm.
Configured
Indicates whether the alarm is
configured or not configured.
Enabled/Reset Date
Indicates the date on which the
alarm was enabled or last reset.
Alarm Name
Indicates the name given to the
alarm.
Date/Remaining
Cycles
Indicates the pre-set date or
remaining cycles at which the
alarm needs to trigger.
NOTE : A negative value of cycles
indicates that the alarm has
triggered.
Status
Indicates whether the alarm is
active or inactive.
Go to top
Close