Inovytec Ventway Sparrow User Manual

Ventway Sparrow User Manual
Page 112 of 144
18.6. STANDARDS AND SAFETY REQUIREMENTS
The Ventway Sparrow meets the requirements of the following inter-
national standards:
IEC 60601-1
Medical electrical equipment — Part 1: General
requirements for basic safety and essential per-
formance
IEC 60601-1-2
Medical electrical equipment — Part 1-2: General
requirements for basic safety and essential per-
formance — Collateral Standard: Electromagnetic
disturbances — Requirements and tests
IEC 60601-1-12
Medical electrical equipment — Part 1-12:
General requirements for basic safety and
essential performance -
Collateral Standard:
Requirements for medi
cal electrical equipment
and medical electrical systems intended for use in
the emergency medical services environment
ISO 80601-2-12
Medical electrical equipment — Part 2-12:
Particular
requirements for basic safety and
essential performance of critical care ventilators
ISO 10651-3
Lung ventilators for medical use — Part 3: Par-
ticular requirements for emergency and transport
ventilators
EN 794-3
Lung ventilators. Particular requirements for
emergency and transport ventilators
RTCA DO-160G
Environmental Conditions and Test Procedures
for Airborne Equipment
Rotary wing – Helicopters
EN 1789
Medical vehicles and their equipment. Road
ambulances
MIL-STD-810G
Department of defense test method standard:
Environmental engineering considerations and
laboratory tests

Inovytec Ventway Sparrow Specifications

General

Brand	Inovytec
Model	Ventway Sparrow
Category	Medical Equipment
Language	English