Ventway Sparrow User Manual
Page 71 of 144
11. WARNINGS AND ALARMS
This section provides information about alarms, and examples of typical
system messages.
11.1. BOOT FAIL ALARMS
A Boot Fail alarm is displayed on a blue screen and indicates that the
device has not started properly.
Example of Boot Fail alarm
The specific error message is displayed in the part of the screen
indicated above.
The following Boot Fail alarms can be fixed by the manager:
• Error in Flash checksum- installed software is problematic
• Error in SD card validity – missing or corrupted specific SD card files
For the following Boot Fail alarms, contact customer service and report
the error:
• Voltage not in range – knob voltage is not up to appropriate range
levels
displays here
To Next Page
Loading...
Need help?
General