Reworks
38 Intel Confidential User Guide
8 Reworks
8.1 Mandatory Reworks
Note: Reworks – 8.1.1 was implemented in RVP Schematics and Layout board file.
Customers implementing the feature reworks such as 8.2.1 to 8.2.11 and
optional reworks 8.3.1 to 8.3.6 in their designs, have to refer to the reworks
provided only in the user guide under the respective rework sections.
8.1.1 Straps to Power On the Board
Description: This rework is to set the JTAG ODT, XTAL select, consent and
personality straps
Impact of implementing the rework: Board straps are set to correct mode after
this rework
Details: SMT Resistor rework.
Applicable To: H3AZ01, H3AZ02, H4BZ01.
Table 1. Rework Detail
Action Item RefDes Description of Existing
Part
Description of New
Part
Stuff Resistor R9D60 NA
4.7KOhm, 5%, 0402
Un-Stuff Resistor R9D58 20KOhm, 5%, 0402 NA
Stuff Resistor R7D12 NA 10KOhm, 5%, 0402
Stuff Resistor R7F10,
R7G25
NA 20KOhm, 5%, 0402
Un-Stuff Resistor R7P8 0.01Ohm, 1%, 0603, 1/10W NA
To Next Page