Intel Coffee Lake S - Rework to Enable Audio in Soundwire* Mode; Figure 52. Layout Snapshot - Bottom Layer; Table 10. Rework Detail

Reworks
66 Intel Confidential User Guide
Figure 52. Layout Snapshot – Bottom Layer
8.2.8 Rework to Enable Audio in SoundWire* Mode
Description: This rework is required to enable SoundWire* signals and disconnect
HDA signals to the onboard codec.
Impact of implementing the rework: Onboard codec will not work in HDA mode
after this rework.
Details: SMD Resistor rework
Applicable To: H5AZ02, H6AZ05, H6AZ08, H7AZ03, H7BZ03, H7AZ05, H7AZ08,
H6AZ09, H7AZ02, H7BZ02, H7AZ04, H8AZ02, H8AZ03, U17612, H7AZ07, H8AZ04,
H7BZ06, H3BZ02, H6AZ04, H7AZ06, H9AZ02, I1AZ01, I2AZ02, I2AZ04, I1AZ02,
I3AZ03, I3AZ05, I4BZ01, I5AZ01, I3AZ04.
Table 10. Rework Detail
Action Item RefDes Description of
Existing Part
Description of New
Part
Un-Stuff Resistor R7E2, R7E4, R7E7,
R7E8,R9A15,R9B8
0 Ohm, 5%, 402 NA
Stuff Resistor R9A14, R9B7 NA 0 Ohm, 5%, 402