Intergas Rapid 25 Installation Manual

Intergas Heating Ltd 17
5.3 Assembly
Depending on the connection situation, to mount the appliance use is made of a
suspension strip or a top connection frame.
A connection set with shut off valves and a gas valve is included in the boiler.
5.3.1 Fitting the mounting strip
1. Fasten the mounting strip horizontally to the wall.
2. Make sure the strip is levelled correctly.
5.3.2 Fitting the rear mounting frame
1. Fasten the frame vertically to the wall, using the screws and plugs supplied.
2. Make sure the frame is levelled correctly.
Caution
The appliance is wider than the frame.

Intergas Rapid 25 Specifications

General

Boiler Type	Combi
DHW Output	25 kW
Efficiency Rating	93%
Flow Rate	10.2 l/min
Mounting	Wall Mounted
ERP Efficiency	A
Max Gas Rate	2.78 m³/h
Dimensions (H x W x D)	590 x 450 x 240 mm