Intergas Rapid 25 Installation Manual

Intergas Heating Ltd 48
10. SERVICING THE BOILER
The appliance and the installation should be checked and if necessary cleaned
every year by a registered expert.
For assembly and disassembly the following tools can be used:
4. Cross head screwdriver
5. Allen key 8 mm
6. Fork spanner 30 mm
After servicing, complete the relevant Benchmark Service Record section located
on page of this document.
CAUTION
Work on gas carrying parts may only be carried out by an authorised
installer.
When the appliance has just been operating parts may be hot.
CAUTION
The integrated insolation and burner seal contain ceramic
fibres.

Intergas Rapid 25 Specifications

General

Boiler Type	Combi
DHW Output	25 kW
Efficiency Rating	93%
Flow Rate	10.2 l/min
Mounting	Wall Mounted
ERP Efficiency	A
Max Gas Rate	2.78 m³/h
Dimensions (H x W x D)	590 x 450 x 240 mm