2BChapter 3: Getting started
14 TruVision DVR 44HD User Manual
Caution: It is strongly recommended that you change the password of the administrator. Do
not leave 1234 as the default password. Write it down in a safe place so that you do not
forget it.
If you should forget the password to your recorder, contact your supplier with the serial
number of your recorder to obtain a secure code to reset it.
Click Next.
5. Time and date configuration:
Select the desired time zone, date format, system time, and system date.
If Daylight saving time (DST) is required, check Enable DST and enter the desired summer
and winter times.
Note: The system time and date are visible on screen. However, they do not appear in
recordings.
Click Apply and then Next to move to the next page or click Previous to return to the
previous page.
6. Network configuration:
Configure your network settings such as the NIC type, IP address, subnet mask, and default
gateway. Enter the preferred DNS server address as well as the alternate one to use.
Click Next to move to the next page, or Previous to return to the previous page.
To Next Page
Loading...
