Intermec EasyCoder PF4i - Returning to Factory Default Setup

Chapter
6
—
Setting
Up
the
Printer
Returning
to
Factory
Default
Setup
Therearetwowaystoreturntothefactorydefaultsetupoftheprinter:
AInsertaspecialCompactFlashmemorycardandrestarttheprinter.
BUsingtheprinter’sbuilt-inkeyboard.
Toresettheprinterusingthekeyboard,dolikethis:
1Lifttheprinthead.
2
Switchonthepowertotheprinterandpressthe<i/F5>keyandwait
untiltheprinterbeeps.
3Swiftlypressthefollowingkeys:
</F4>
4Thefollowingmessagewillbedisplayed:
Factory Default?
Enter=Yes ESC=No
5Within10seconds,press<Enter>toresettheprintertofactory
default.Theparameterswillberesetandtheprinterwillcontinuethe
normalstartup.
Ifyoupress<Esc/F2>orwaituntilthe10secondstimeouthaspassed,
thenormalstartupwillcontinuewithoutanyresetbeingperformed.
Note:
Ifanyofthe
fi
les"card:NOSHELL.CFG",
rom:NOSHELL.CFG",or"c:NOSHELL.CFG"existsinthe
printer’smemory,noresettofactorydefaultwillbeperformed.
Thefactorydefaultwillremoveallfilesusedtostoresettings.
Itwillnotresetsettingsthatalreadyhasbeenreadwhenthe
fi
lesareremoved.ThismeansthatEasyLANWirelesssettings
(SSID,keys,etc.)willretaintheirvaluesfromtheprevious
start.However,thenextrebootwillresetthemtofactory
default.
62