Intermec EasyCoder PF4i User Manual

Chapter
9
—
Options
Label
Taken
Sensor
TheLabelTakenSensor(LTS)isaphotoelectricsensorthatenablesthe
printer’s
fi
rmwaretodetectifthelatestprintedlabel,ticket,tag,etc.has
beenremovedbeforeprintinganothercopy.TheLTScanbeenabledor
disabledusingtheinstructionsLTS&ONandLTS&OFFrespectively
inIntermecFingerprintandtheIntermecDirectProtocol.
TheLTScannotbeusedinconnectionwithapapercutter.
Real
Time
Clock
TheRealTimeClockcircuit(RTC)relievestheoperatororthehost
fromhavingtosettheclock/calendarusingtheIntermecFingerprint
instructionsDATE$andTIME$aftereachpowerup.TheRTChasits
ownbackupbatterybackupthatwilllast10yearsormore.
CompactFlash
Protection
Plate
TheprotectionplateenclosesaninsertedCompactFlashcardandmakes
itmoredif
fi
culttosteal.SeeChapter3forillustration.
Special
Printheads
Asstandard,theprinterisfittedwithan8dots/mm(203.2dots/inch)
thermalprinthead.Therearealsoanumberofoptionalprintheadsfor
specialapplications:
8 dots/mm (203.2 dots per inch)
11.81
dots/mm
(300
dots
per
inch)
Theprintheadcaneasilybereplacedorexchangedbytheoperatoras
describedinChapter11.
88

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g