Intermec EasyCoder PF4i User Manual

Chapter
3
—
Starting
Up
Memory
Card
Ifyouwanttouseamemorycard,youmustinsertitintotheslotinthe
printer’srearplatebeforeyouswitchonthepower.Thememorycard
mustbeaCompactFlashcard(8MB-1GB).CompactFlashcardsmarked
“CF+”willnotwork.YoucanusetheCompactFlashcardtoexpandthe
printer’sstoragememory("card1:").Therearealsothreetypesofprepro-
grammedCompactFlashcards:
·FontCardsprovideadditionalfontsthatcanbeusedaslongasthe
cardremainsinsertedintheprinter.
·FontInstallCardspermanentlyinstalladditionalfontsintheprinter,
whichcanbeusedevenafterthecardhasbeenremoved.
·FirmwareCardsautomaticallyreplacetheprinter’s fi rmware,usually
withanupdatedversion.
CompactFlashcardsarewidelyusedforconsumer’scomputerproducts
likedigitalcameras.Youcangetacertainprotectionfromtheftbyinstall-
inganoptionalplatethatcoversaninsertedCompactFlashcard.
CompactFlash
memory card
Protection plate
with screw
(option)
Note:
Alwaysswitchoffthepowerbeforeinsertingorremoving
amemorycard!Thecardwillonly fi tinoneway.Amemory
cardisonlydetectedifitisinsertedbeforetheprinteris
started.
Intermec
EasyCoder
PF4i
Compact
Industrial
—
User
’
s
Guide
(Fingerprint)

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g