Intermec EasyCoder PF4i User Manual

Chapter
2
—
Installation
Controls
and
Indicators
TheEasyCoderPF4iCompactIndustrialhasseveralwaysofcommuni-
catingdirectlywithitsoperator:threecoloredindicatorlamps,adisplay
window,amembrane-switchkeyboardwith22programmablekeys,abig
programmable“Print”buttonontheprinter’sfront,andabeeper.
Indicator
Lamps
TheindicatorsarecoloredLEDs(LightEmittingDiodes)andareused
forthefollowingpurposes:
Power(solidgreen)indicatesthatthepowerison.
Status(solidgreen)indicatesthattheprinterisreadyforuse.
Status(
fl
ashinggreen)indicatesthattheprinteriscommunicating.
Status(solidred)indicatesanerrorcondition(seeChapter10).
IntermecReadinessIndicator(blue;on,blink,oroff).
RepresentedbyabluelightonIntermechandheldcomputers,access
points,andprinters,theIntermecReadinessIndicatorispartofan
exclusivemonitoringsystemfromIntermec.TheIntermecReadiness
IndicatorhelpsusersquicklydeterminethereadinessoftheIntermec
deviceindividuallyandaspartofasolution.TheIntermecReadiness
Indicatorhasthreedifferentstates:On,Blinking,andOff.Whenthe
Indicatorisoff,thedeviceisnotreadytooperateindividuallyoras
partofasolution.WhentheIndicatorisblinking,thedevicemaybe
initializing,waitingforexternalresources,orinneedofuseratten-
tion.AndwhentheIndicatorisOn,thedeviceisreadyforuseas
partofasolution.AlsoseeChapter10.
14

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g