Intermec EasyCoder PF4i User Manual

Chapter
4
—
Media
Load
External
Supply
(Fan-fold)
TheEasyCoderPF4iCompactIndustrialcanprintonlabels,tickets,
tags,andcontinuousstockinvariousforms.Thissectiondescribesthe
casewhenthemediasupplyisplacedbehindtheprinter,usuallyinthe
formoffan-foldedticketsortags.Externalsupplycanbeusedwithtear-
off(straight-through)printing—preferablywithQuick-Load.
Externalsupplycanonlybeusedwithalongsidedoor,notthemegatop.
Thereisnoneedtoremovethemediasupplyrollpost.
Whenusinganexternalmediasupply,takecaretoprotectthemedia
fromdust,dirtorotherforeignparticles,thatcanimpairtheprintout
qualityorcauseunnecessaryweartotheprinthead.
Dependingonbrandandquality,alldirectthermalmediaaremoreor
lesssensitivetoheat,directsunlight,moisture,oil,plasticizers,fat,and
othersubstances.Youshouldprotectthemaccordingly.
This
diagram
shows
the
media
path
from
an
external
supply.
In
case
of
the
standard
edge
guide
(as
opposed
to
Quick-Load
guides),
turn
it
to
vertical
position.
38

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g