EasyManua.ls Logo

Intermec EasyCoder PF4i User Manual

Intermec EasyCoder PF4i
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #237 background image
Appendix
D
Intermec
Supplies
Recommended
Paper
Type
Settings
(North
America)
Direct
Thermal
Printing;
8
dots/mm
(203.2
dpi)
Type/Speed
TopCoated/
Standard
TopCoated/
High
Thermal
Transfer
Printing;
8
dots/mm
(203.2
dpi)
Type/Speed
TMX1500
TMX2200
TMX2500
TMX3200
1
turely.Iftheambienttemperatureislowerthan+15°C(+59°F),decreaseprintspeedby
50mm/sec.
2
3

Table of Contents

Other manuals for Intermec EasyCoder PF4i

Questions and Answers:

Intermec EasyCoder PF4i Specifications

General IconGeneral
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Standard interfacesRS-232, USB 2.0
Internal memory16 MB
Power consumption (standby)15 W
Power consumption (printing)300 W
Media thickness3/7.5 mm
Maximum label width104 mm
Maximum label length0.4 m
Maximum roll diameter152.4 /213 mm
Maximum internal memory1 GB
Supported network protocolsTCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product colorBlue, Silver
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)40 - 104 °F
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth405 mm
Width244 mm
Height178 mm
Weight8000 g

Summary

Introduction

Safety Summary

Crucial safety information and precautions for safe operation.

Description of EasyCoder PF4i Compact Industrial

Detailed overview of the printer's features and capabilities.

Installation

Connections

How to connect the printer to power and computers.

Starting Up

Switching On the Printer

Step-by-step guide to powering on the printer.

Media Load

Tear-Off (Straight-through)

Loading media for tear-off operation.

Cut-Off

Loading media for use with the automatic paper cutter.

Peel-Off (Self-strip)

Loading self-adhesive labels for peel-off dispensing.

Thermal Transfer Printing

Ribbon Load

Instructions for loading the thermal transfer ribbon.

Setting Up the Printer

Setup Mode

How to enter and use the printer's setup menu.

Setup Parameters

Detailed configuration options for printer operation.

Serial Communication

Configuring serial port settings like Baud Rate and Parity.

Feed Adjust

Adjusting media feed for accurate printing.

Media

Defining media size and type for optimal printing.

Paper Type

Selecting direct thermal or thermal transfer printing settings.

Returning to Factory Default Setup

Resetting printer settings to their original default values.

Setup Mode

Setup Mode; Serial Communication "uart1:"

Detailed setup flow for the UART1 serial port configuration.

Setup Mode; Media

Detailed setup flow for media parameters like type and size.

Setup Mode; Print Defs

Detailed setup flow for print definition parameters.

Troubleshooting

Intermec Readiness Indicator

Understanding the printer's status indicator lights.

Display Messages and LED Indications

Troubleshooting based on error messages and LED status.

Symptom/Possible/Remedy/Refer to Table

Common print quality issues and their solutions.

Maintenance

Printhead Cleaning

Procedures for cleaning the printer's printhead.

Printhead Replacement

Instructions for replacing the printhead.

Media Jams

Steps to clear jammed media from the printer.

Adjustments

Label Stop Sensor

How to adjust and test the label detection sensor.

Printhead Pressure

Adjusting the pressure of the printhead for optimal print quality.

Interfaces

RS-232 Interface

Details on the serial communication port and its protocol.

USB Interface

Information about the USB connection and requirements.

Intermec Supplies

Transfer Ribbons

Recommended ribbon types for thermal transfer printing.

Related product manuals