Intermec EasyCoder PF4i User Manual

Chapter
12
—
Adjustments
Printhead
Pressure
Thepressureofthethermalprintheadagainstthedirectthermalmedia
isfactory-adjusted.However,theuseofthickerorthinnermediathan
normalcouldrequiretheprintheadpressuretobereadjusted.
Usingastraight-slotscrewdriver,turntheadjustmentscrewclockwisefor
morepressure(+)orcounterclockwiseforlesspressure(-).Printafew
labels,preferablytestlabels(seeChapter6,“SettingUpthePrinter”)and
checktheprintout.Increasedpressuregenerallygivesadarkerprintout
andviceversa.Repeatuntilthedesiredresultisobtained.
Toreturntothefactorysetting,tightenthescrew(+)asfarasitgoesand
thenloosenit(-)fourfullturns.
Donotuseahigherprintheadpressurethannecessary,
becauseitmayincreasethewearoftheprintheadand
shortenitslife.
Adjustment
screw
112

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g