Intermec EasyCoder PF4i User Manual

Chapter
8
—
Intermec
Shell
Startup
Program
Intermec
Shell
v8.
1
Overview
POWER ON
is fitted.
ENTER=SHELL
3 s e c.
ENTER=SHELL
2 s e c.
ENTER=SHELL
1 s e c.
Last selected
application is started
Default:
Fingerprint 8.20 w. std I/O = "auto"
centronics:
Legend:
STD I/O CHANNEL
Return to previous menu.
Proceed to next menu.
Accept displayed option
and proceed, or
execute displayed option.
Perform a Testfeed
anywhere in Intermec Shell.
Enter the Setup Mode
from anywhere
in Intermec Shell.
SHELL
DE FAULT S ETUP
SHELL
SOFTWARE UPDATE
SHELL
R EB O OT

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g