Intermec EasyCoder PF4i User Manual

Whiteverticall
ines
Printheaddirty
Missingprinthe
ad
Cleanprinthead
Replaceprinthe
ad
Chapter11
Chapter11
Largepartofdot
line
missing
WrongX-startor
Widthparameter
Failingprinthe
ad
Changeparamete
r
Replaceprinthe
Chapter6
Chapter11
CallServi
Printoutmissin
g
alonginneredge
Badmediaalign-
ment
Smallcore&supp
ly
postinupperpos
.
Adjust
Moveposttolowe
r
pos.
Chapter4
Chapter2
Chapter6
Transferribbon
breaks
Ribbonnotfitted
correctly
Wrongpapertype
parameter
Badenergycontr
Reloadribbon
Changeparamete
r,
thencleanprint
Chapter5
Chapter6
CallServi
Transferribbon
wrinkles
Faultyribbonbr
eak
shaftadjustmen
t
Incorrectedgeg
uide
Adjust
Adjust
Adjust
Chapter12
Chapter4
Chapter12
Nothermaltrans
fer
Ink-coatedside
does
Reloadribbon Chapter5
Mediafeednot
workingproperl
y
Changedmedia
characteristic
s
Wrongstart-and
stopadjustvalu
es
WrongMediaType
parameter
WrongLSSpositi
on
PerformaTEST-
FEED
Check/change
Check/change
Check/change
Cleanmediaguid
es
Chapter4
Chapter6
Chapter6
Chapter12
Chapter11
CallServi
Compressedtext
or
barcode
Toohighprint
speedforlarge
mediaroll
Lowerprintspee
d
Chapter6
Industrial
—
User
’
s
Guide
(Fingerprint)

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g