Intermec EasyCoder PF4i User Manual

Chapter
1
—
Introduction
Safety
Summary
IntermecassumesnoresponsibilityregardingtheCEDirectiveifthe
printerishandled,modi
fi
ed,orinstalledinanywayotherthanthat
describedinIntermec’smanuals.
·Readthismanualcarefullybeforeconnectingtheprinter.
·Movingpartsareexposedwhenthedoorsareopen,soensurethatthe
doorsareclosedbeforeyouoperatetheprinter.
·Donotopenthefront/left-handcover.Dangerousvoltage!
·Donotremovethebottomplate.Dangerousvoltage!
·Donotputyourfingersinsidetheprintmechanismwhenthepoweris
on.
·Placetheprinteronanevensurfacewhichcansupportitsweightof
approximately7to8kg(15.5to17.7pounds)plussupplies.
·Donotspraytheprinterwithwater.Ifyouareusingahosetoclean
thepremisesinanindustrialenvironment,removetheprinterorpro-
tectitcarefullyfromsprayandmoisture.
·Carefullyreadthewarningtextontheenvelopebeforeusingaclean-
ingcard.
Product
Identi
fi
cation
Themachinelabelisattachedtotheprinter’srearplateandcontains
informationontype,model,andserialnumberaswellasACvoltage.It
alsocontainsvarioussignsofapproval.
Intermec
EasyCoder
PF4i
Compact
Industrial
—
User
’
s
Guide
(Fingerprint)

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g