Chapter 2 — Connecting the SF61B
SF61 Cordless Scanner User’s Guide 25
SF61B Bluetooth Device Address Location
When connecting your SF61B to a host device you may need to note
its Bluetooth Device Address (BDA) which you will find on the
product label:
SF61B Bluetooth Device Address: The SF61B Bluetooth Device Address (BDA) is
located on the scanner label.
You may also need the BDA of the Bluetooth host device you want to
connect to.
Out of Range Behavior
If the Bluetooth connection is lost (out of range, scanner battery too
low, etc.) the scanner will automatically try to reconnect once the
problem is resolved (back into range, recharge scanner battery, etc.). If
you try to read a bar code while the scanner is disconnected from the
host, the scanner will emit an error beep.
SN: XXXXXXXXXXX
CN: XXXXXXXXXXXXXX
Intermec Technologies Corp.
Everett, WA USA
BDA: XXXXXXXXXXXXXX
MODEL, MODELO, , :
1016SP01B
MFD, , : YYYYMMDD
1.7A
5V
Bluetooth device address
Note: This automatic reconnection will not occur if the SPP Outgoing
(host-initiated) profile is used to pair with the host.
To Next Page
Loading...
Need help?
General
